Feeders

Description

1. Features
   The nipple is made of silicone (with a round orifice) that is easy for puppies and kittens to suck.
2. Usage directions
   ・Set the nipple firmly on the cap, then attach the cap to the main body bottle.
   ・If the puppy or kitten is unable to suck strongly enough, help them by gently squeezing the bottle (note that squeezing too strongly will dispense too much milk).
   ・Wash the product thoroughly after use and keep it clean, such as by bringing the bottle to a boil to disinfect it. Especially the nipple in order to prevent the orifice from getting clogged.
   ・If disinfecting by boiling, do so for 3 minutes for the bottle and cap, and 1 minute for the nipple.
3. How to get your pet to drink milk
   ・Your pet will drink well if you allow it to pass urine and stool first.
   ・To encourage the pet to pass urine and stool, wet a piece of gauze in warm water and use it to gently massage the pet's genitals.
   ・If you want to enlarge the nipple orifice, use scissors to make a small incision in the orifice.
4. Preparing the formula
   ・Dissolve the milk completely.
   ・The appropriate temperature range is between 35°C–40°C.
   ・Prepare fresh formula every time you feed your pet.

To ensure safe usage

・Keep the bottle out of reach of infants and pets to avoid a choking accident.
・Wash the product thoroughly after use and keep it clean.
・Before feeding your pet, make sure the milk dispenses properly.

　※ Turn the bottle upside down and squeeze the bottle gently to see whether it dispenses properly.
・Before use, be sure to check whether the nipple is torn. If the nipple is damaged, replace it with a new one.
・If milk tooth begin to appear, use an eating utensil for feeding. Otherwise, the pet may bite off and swallow the nipple.